One SSD-based Data Processing Server -Supply and Maintenance

Tender description

Full details available in the Document section to upload. 2 Specification of Requirements Potential suppliers are welcome to quote for upgrade options exceeding these minimal requirements. DIAS will ensure that all tender bidders will have an opportunity to quote for the actual specifications of the winning solution, either by requesting updated quotes from the tender bidders or announcing a new tender. The minimal requirements to be met by the proposed solution are as follows: - 2 rack units size mounted on moving rails; - at least 2 redundant power supplies; - 2 processors (Preferably Intel based) with the minimal turbo frequency of 3.5GHz, 4 memory channels per processor operating at the minimum speed of 2133MHz each and 2 processors interconnect channels operating at the minimum speed of 9.6 GT/s each; - at least 12 physical cores per processor; - at least 512 GB RAM running at the minimum speed of 2133MHz (all 8 available processor memory channels must be in use); - two independent SSD arrays, each of them consisting of: - a hardware RAID controller with at least 2GB of battery-protected or non-volatile memory cache, full support of RAID6 and SSD I/O acceleration (FastPath or equivalent if available); - at least 8 solid-state drives with the minimum capacity of 400GB per drive, sequential read/write speeds not lower than 500MB/sec, random 4KB read/write speeds not lower than 50000/20000 IOPs and write endurance of at least 0.3 drive writes per day over 5 years; - at least two SFP+ 1/10 Gigabit Ethernet Ports compatible with Intel ixgbe Linux driver; - an integrated remote access controller providing virtual console and virtual media facilities as well as IPMI 2.0 support; - no software installation or licence is required. -All system components must be compatible with Linux. Compatibility with FreeBSD would be a plus.