CNC Machine for routing and boring applications related to panels. doors, element doors and furniture. Delivery & Installation in Co. Waterford

Tender description

Numerically controlled machining centre • Automatic lubrication system • Auxiliary vacuum system • Air conditioner for electric cabinet • Emergency recovery procedure • Division of the vacuum system in 2 working areas in X and 2 independent locking zones in X. The enabling of single or double area is done by numerical control, depending from the maximum X size of active program. • Working Field - X=3140mm, y = 1270mm, z = up to 245mm • Safety systems in compliance with EC norms, with front and rear bumpers. • Uninterruptible Power Supply unit (UPS) for the machine PC. • 6 ATS panel supports - 18 sliding bases • SA working table (Set-Up Assistant) for working tables up to 1550 mm. Manual working table positioning system aided by direction and position lights. Sensors on each working table and along X axis of the working area One magnet on each carriage and on each working table ATS table handles with LED direction indicators and acoustic signal for reached position. Viewer device for the carriage during positioning phase, with direction and reached position lights, installed on each working table 2 Extension sticks for back carriage positioning • Pneumatic locking system divided in 2 work areas in X • 6 x Stop of the back line with a stroke of 115 mm and extension of 25 mm. • 6 x Stop of the front line, positioned at 848 mm, with a stroke of 140 mm. • 4 x Side stops with a stroke of 140 mm (2 Lh + 2 Rh) inclusive of the pneumatic system. • 16 x Sensor for the detection of lowered stops • 4 x lifting bar supports for loading ease - H=74mm modules. • 100 m3/h rotary vanes vacuum pump with oil working • 12 x Vacuum module - Size 132x146 - H74mm, with high friction surface and integrated sealing gasket of the vacuum. • 6 x Vacuum module - Size 132x75 - H74mm, with high friction surface, integrated sealing gasket of the vacuum and prearrangement for needles • 13 kW (17.4 HP) operating unit with 5 interpolating axes, HSK F63 adaptor and liquid cooling