Gas pressure equipment

Tender description

A framework agreement in multiple lots for the manufacturing and/or supply of pressure reduction systems and associated equipment for Gas Networks Ireland. DX and TX pressure reduction systems. The scope of this framework consists of but is not limited to the procurement and quality assurance of materials and components, fabrication, welding, non-destructive testing(including radiography), pressure testing, assembly, painting, delivery and provision of documentation for various gas metering installations and pressure reduction systems as per lots 1-3 and detailed in appendix 3. Pressure reduction system packages ordered by Gas Networks Ireland may include but are not limited to all or some of the following elements together with associated pipework, electrical and instrumentation equipment. As per the PQQ document. A framework agreement in multiple lots for the manufacturing and/or supply of pressure reduction systems and associated equipment for Gas Networks Ireland. Dx and TX pressure reduction systems. The scope of this framework consists of but is not limited to the procurement and quality assurance of materials and components, fabrication, welding, non-destructive testing (including radiography), pressure testing, assembly, painting, delivery and provision of documentation for various gas metering installations and pressure reduction systems as per lots 1-3 and detailed in appendix 3. Pressure reduction system packages ordered by Gas Networks Ireland may include but are not limited to all or some of the following elements together with associated pipework, electrical and instrumentation equipment: • valves; • filters; • gas meters; • heat exchangers; • pressure reduction streams (regulators, slam shut valves, relief valves, where applicable); • fuel gas let down; • acoustic GRP enclosures. Lots 1-3 below gives details of installation, gas meter type and flow rates, pressure and temperature conditions required for each meter size. This framework will be split into 3 lots, as below: Lot 1: single steam PN16 G25 (40 scmh) to G250 (400 scmh) DX pressure reduction systems. Lot 2: large and twin stream PN16 G100 (160 scmh) to SP3 (4000 scmh) pressure reduction systems and district regulating stations. Lot 3: pressure reduction systems (and associated equipment) with Inlet pressures ranging from 7 to 85 barg and capacities from 5 000 scmh to 50 000 scmh Note: GNI may have the requirement to purchase individual pressure reduction components to suit capacities in excess of 50 000 scmh. Applicants may apply for 1, 2 or 3 lots. A maximum of 4 applicants per lot will be invited to ITT stages – applicants are required to meet the minimum requirements and applicable scoring criteria detailed within the PQQ, Applicants will be ranked in order of scores. Top 4 applicants for each lot will be invited to the ITT stage. If 2 or more applicants are tied in fourth place – all fourth placed applicants will be invited. Applicants should refer F1 of the PQQ. A framework agreement in multiple lots for the manufacturing and/or supply of pressure reduction systems and associated equipment for Gas Networks Ireland. DX and TX pressure reduction systems. The scope of this framework consists of but is not limited to the procurement and quality assurance of materials and components, fabrication, welding, non-destructive testing (including radiography), pressure testing, assembly, painting, delivery and provision of documentation for various gas metering installations and pressure reduction systems as per lots 1-3 and detailed in appendix 3. Pressure reduction system packages ordered by Gas Networks Ireland may include but are not limited to all or some of the following elements together with associated pipework, electrical and instrumentation equipment: • valves; • filters; • gas meters; • heat exchangers; • pressure reduction streams (regulators, slam shut valves, relief valves, where applicable); • fuel gas let down; • acoustic GRP enclosures. Lots 1-3 below gives details of installation, gas meter type and flow rates, pressure and temperature conditions required for each meter size. This framework will be split into 3 lots, as below: Lot 1: single steam PN16 G25 (40 scmh) to G250 (400 scmh) DX pressure reduction systems. Lot 2: large and twin stream PN16 G100 (160 scmh) to SP3 (4000 scmh) pressure reduction systems and district regulating stations. Lot 3: pressure reduction systems (and associated equipment) with Inlet pressures ranging from 7 to 85 barg and capacities from 5 000 scmh to 50 000 scmh Note: GNI may have the requirement to purchase individual pressure reduction components to suit capacities in excess of 50 000 scmh. Applicants may apply for 1, 2 or 3 lots. A maximum of 4 applicants per lot will be invited to ITT stages – applicants are required to meet the minimum requirements and applicable scoring criteria detailed within the PQQ, applicants will be ranked in order of scores. Top 4 applicants for each lot will be invited to the ITT stage. If 2 or more applicants are tied in fourth place – all fourth placed applicants will be invited. Applicants should refer F1 of the PQQ. A framework agreement in multiple lots for the manufacturing and/or supply of pressure reduction systems and associated equipment for Gas Networks Ireland. DX and TX pressure reduction systems. The scope of this framework consists of but is not limited to the procurement and quality assurance of materials and components, fabrication, welding, non-destructive testing (including radiography), pressure testing, assembly, painting, delivery and provision of documentation for various gas metering installations and pressure reduction systems as per lots 1-3 and detailed in appendix 3. Pressure reduction system packages ordered by Gas Networks Ireland may include but are not limited to all or some of the following elements together with associated pipework, electrical and instrumentation equipment: • valves; • filters; • gas meters; • heat exchangers; • pressure reduction streams (regulators, slam shut valves, relief valves, where applicable); • fuel gas let down; • acoustic GRP enclosures; Lots 1-3 below gives details of installation, gas meter type and flow rates, pressure and temperature conditions required for each meter size. This framework will be spilt into 3 lots, as below: Lot 1: single steam PN16 G25 (40 scmh) to G250 (400 scmh) DX pressure reduction systems. Lot 2: large and twin stream PN16 G100 (160 scmh) to SP3 (4000 scmh) pressure reduction systems and district regulating stations. Lot 3: pressure reduction systems (and associated equipment) with Inlet pressures ranging from 7 to 85 barg and capacities from 5 000 scmh to 50 000 scmh. Note: GNI may have the requirement to purchase individual pressure reduction components to suit capacities in excess of 50 000 scmh. Applicants may apply for 1, 2 or 3 lots. A maximum of 4 applicants per lot will be invited to ITT stages – applicants are required to meet the minimum requirements and applicable scoring criteria detailed within the PQQ, applicants will be ranked in order of scores. Top 4 applicants for each lot will be invited to the ITT stage. If 2 or more applicants are tied in fourth place – all fourth placed applicants will be invited. Applicants should refer F1 of the PQQ.