Stale Pre-tender

Technical testing, analysis and consultancy services

Details

Topic
Technical testing, analysis and consultancy services
Published
28 August 2018

Tender description

The Coal Authority operate over 75 minewater treatment schemes that remove contaminating metals from mine water prior to the treated water being discharge into a receiving watercourse. Schemes range from complex process engineering plants, through pumped wet wells and boreholes/mineshafts, to totally natural (passive) schemes without a power source. A number of sites require the addition of pH correcting or oxidising reagents. Flow rates range from circa 5 litres/sec to 400 litres/sec. A standard pumped treatment scheme utilizes 32 digital inputs, 8 analogue inputs and 8 digital outputs. The majority of treatment schemes comprise of aeration cascades, settlement ponds and reed beds. All schemes are subject to regulatory consents and licenses. The idea behind the general process testing is to provide treatment options for mine water using optimised processes, novel technologies and the most applicable methodology in terms of least whole life cost for new and existing schemes. The Coal Authority was established by Parliament to undertake specific statutory duties, set out in the Coal Industry Act 1994, associated with licensing coal mining operations; managing property and the historic legacy arising from the ownership of the coal reserves and underground workings; settling subsidence damage claims not falling on coal mine operators and providing access to coal mining information. The Coal Authority operate over 75 minewater treatment schemes that remove contaminating metals from mine water prior to the treated water being discharge into a receiving watercourse. Schemes range from complex process engineering plants, through pumped wet wells and boreholes/mineshafts, to totally natural (passive) schemes without a power source. A number of sites require the addition of pH correcting or oxidising reagents. Flow rates range from circa 5 litres/sec to 400 litres/sec. A standard pumped treatment scheme utilizes 32 digital inputs, 8 analogue inputs and 8 digital outputs. The majority of treatment schemes comprise of aeration cascades, settlement ponds and reed beds. All schemes are subject to regulatory consents and licenses. The idea behind the general process testing is to provide treatment options for mine water using optimised processes, novel technologies and the most applicable methodology in terms of least whole life cost for new and existing schemes. The Coal Authority believes to achieve this, the development of testing programs and conducting investigations is essential. In addition, mine water chemistry is highly variable and very often site specific. These variances should be considered in unit operations and/or continuous processing in treatment campaigns. Practical areas of interest of the Coal Authority from a potential supplier include: — sample collection and preparation — laboratory testing (off and on site), — pilot testing (off and on site), — analytical Capabilities, — competency in operation of mine water treatment unit operations (filtration, thickening, settling, and sampling), — continuous Stirred Tank Reactor (CSTR), — integrated unit operations with: —— mass balance, —— reagent consumption, —— aeration rate, —— retention time, —— optimisation. Design/modelling capabilities of the supplier must include: — rheology, — plant conceptual design, — process automation, — process control, — pressure filter sizing, — centrifuge sizing, — whole life costs. We would like to invite interested companies to meet with us at our Mansfield office during September / October 2018 to better understand our requirements and offer suggestions on how we might fulfil our objectives through a future tender process. Once the Coal Authority has assessed interest, it will advise on if meetings are to be conducted on an individual basis or as a group with multiple companies present. If you have any queries or wish to attend please express your interest by contacting peterkobryn@coal.gov.uk no later than 18.9.2018 Participants should note that we reserve the right to use any information shared within this market engagement to develop a mature service specification for future procurement purposes. Any costs incurred by participating in this exercise must be borne by the participating organisations. Following this exercise we shall determine if and how we will approach the market to secure the services. Please note that any future procurement will be subject to a separate advertisement.

Timeline

  1. Completed: Pre-tender published28 August 2018
    Current notice

About the buyer

The Coal Authority is a public sector buyer in United Kingdom publishing tenders and awards on Stotles. Explore their procurement activity and find more opportunities like this one.

Relevant CPV codes

  • 71600000 · Technical testing, analysis and consultancy services
  • 71630000 · Technical inspection and testing services

AI insights

  • Is there a preferred supplier?
  • What are the buyers pain points?
  • What has the buyer previously procured?
  • What are the key requirements?
Sign-up to enrich

Decision makers

Connect with the people behind this procurement.

Contact nameJob titlePhone numberWork email
Head of Procurement+44 •••• ••••••
Commercial Director+44 •••• ••••••
Procurement Manager+44 •••• ••••••
Category Lead+44 •••• ••••••
Senior Buyer+44 •••• ••••••
Contracts Manager+44 •••• ••••••

25 similar open tenders

See more open tenders related to Technical testing, analysis and consultancy services.

Explore all open tenders

Related topics

Topics related to Technical testing, analysis and consultancy services, ranked by notice volume.

View all topics

Related buyers

Buyers similar to The Coal Authority.

View all buyers

Win more public sector contracts

Track every UK and Ireland tender in one place — set up alerts, find decision-makers, and never miss an opportunity.