Electrical Testing Services

This framework is split into 3 LOTs: Lot 1 - Portable Appliance Testing (PAT) A portable appliance is an item of electrical equipment which is connected to the power supply with a flex and a plug. This includes computers and their components. Testing engineers will inspect, test and certify all your portable appliances as well as providing advice as to their condition and safety. A written report will be provided as evidence that they have been inspected and tested for electrical safety. Lot 2 - Fixed Installation Testing (FIT) A fixed electrical installation includes all parts of a distribution system from the main incoming supply point through to wiring accessories such as sockets and light fittings. A thorough visual inspection will be carried out along with electronic tests. Any potentially dangerous defects will be identified. A written inspection report will be provided as evidence that electrical devices have been inspected and tested for electrical safety, the report will also contain information on any defects or deviations from the British Standard that were identified during testing. Lot 3 - Electrical Testing of Street Lighting and Street Furniture Each street lighting asset, illuminated signs/bollards and similar street furniture that requires electrical testing will need to have as a minimum the following tests carried out and the results recorded in electronic format; • Visual inspection to establish the condition of all electrical components, fixings, wiring and terminations, and integrity of the column door and surround; • Verification of correct rating of protective device, continuity of protective conductors and earth bonding; • Insulation resistance between live/earth and neutral/earth with assembly wiring disconnected; • Earth fault loop impedance at District Network Operator supply cut-out; • Capacitance Test shall be carried out and the results of measured values recorded against stated values